daveor
southern oregon
New Member
Joined: 09/27/2008
View Profile
 Offline
|
I just bought a new Polaris X2 500 Sportsman. Reading the manual, It says to lube the chassis, the only zerks are in the upper A frame pivot points. Do I pull the bolts in the lowers and put grease in them or drill and tap and put zerks in. Not sure if they are sealed bushings or what. I asked my dealer. All I got was the DUHmb look and no answer. Thanks. DAve
|
250exridr
NH/MA
Elite Member
Joined: 08/23/2005
View Profile
Offline
|
You gotta ask to talk to their mechanic anyone else working there is about as useful as a poopy flavored lollipop
02 400ex with modZ
|
daveor
southern oregon
New Member
Joined: 09/27/2008
View Profile
Offline
|
Thats who I talked to and got the DUH look, DAve
|
princevaliant1975
Them big hills west of Denver
Elite Member
Joined: 04/08/2003
View Profile
Offline
|
Service manual, best mechanic referral you can get. It will always tell you what you want to know.
Sponsored by
OutLaw Powersports
SGR-USA
SteelMX Optics
Amsoil synthetic oils
TeamVRM.com
Decal Works
Go Fast Energy Drink
|
