pual0101
Washington,WV
Elite Member
Joined: 06/20/2006
View Profile
|
It could be any brand in reality, whoever made it, that is a damn nice looking swinger. Clean welds and looks professional, were you just curious or looking to part with it?
"I'm from a communist country, I don't have to share."
06 DVX 400
Houser +2 A-arms/Swinger
Lonestar Axle
Elka Elite Triple Rates w/Rezzies
HMF Ballance Full System **Red**
OSHC Intake/Exhaust
Tag X-5 Red z400 Bend
PRo Armor Fat Pegs Nerfs
ITP GNCCs/Hipers
|
stumper
SD
Elite Member
Joined: 02/18/2005
View Profile
 Offline
|
pual0101 wrote:It could be any brand in reality, whoever made it, that is a damn nice looking swinger. Clean welds and looks professional, were you just curious or looking to part with it?
Just curious, I am wondering about parts for the chain guide.
SOUTHDAKOTAATV.NET
|
Offroad Maniac
California
New Member
Joined: 08/01/2008
View Profile
Offline
|
No idea who made that swingarm but it is just an o'neal sticker....
--
Offroad Maniac
What else is there????
|
stumper
SD
Elite Member
Joined: 02/18/2005
View Profile
Offline
|
Well, here she is...Not completed in these pics, but close.
We had our first race yesterday,and due to electrical issues didnt get to ride it until 1/2 hr before the race. He still managed a 3rd place finish..Would have won it I think if he knew how to shift,lol.Very happy considering we have less than 1200 bucks into it.
|
blasterfan84
lindsay Ont
Elite Member
Joined: 06/17/2006
View Profile
Offline
|
into what?
KTM 450XC-Ohlins triple rates w/piggie, ohlins damper, hipers, some billet stuff, hindle exhaust, durablue spacers on the front, FLEXX bars, Walsh stem, Maier hood
Thanks to 08 Sponsors
HB Cycle
Scorpion Exo
Hindle
Race Toyota
TEKvest
www.KTMATV.org
|
YOURADHERE
Louisiana
Elite Member
Joined: 07/28/2006
View Profile
Offline
|
Not bad lookin Stump....did you buy it complete(ish) or build it? What motor is that? Raptor frame I assume....
|
stumper
SD
Elite Member
Joined: 02/18/2005
View Profile
Offline
|
YOURADHERE wrote:Not bad lookin Stump....did you buy it complete(ish) or build it? What motor is that? Raptor frame I assume....
It was basically tacked together when we got it. I dropped the motor out,welded/refabed a few things. Sprayed it all black and put it back together. Its a 2001 rappy with a 2002 GSXR 600 engine.Its going to be street legal by the end of the day today.Needs a lot of work yet to pretty it up,got some un needed brackets to remove,but we were just doing what was needed to get it race ready for the weeked.
|
YOURADHERE
Louisiana
Elite Member
Joined: 07/28/2006
View Profile
Offline
|
What are you going to use it for when not using it on the street? Drag racing?
|
stumper
SD
Elite Member
Joined: 02/18/2005
View Profile
Offline
|
300 and 500 ft grass drags
|
YOURADHERE
Louisiana
Elite Member
Joined: 07/28/2006
View Profile
Offline
|
Do you know what it will run in a 300?
|
