drake317
Troy Michigan
Senior Member
Joined: 10/10/2005
View Profile
 Offline
|
Cam is only one of the modifications. The engine and transmission are engineered as a system. New Cam, carb modifications, exhaust, are all designed to give the ATV more power. Problem is not all the other parts of the engine are designed for this power.
One of the most common issues is overheating. The 400 is air cooled so its cooling capacity is limited. Riding this machine hard is going to mean it will be running at higher temperatures. This often leads to other problems that people typically do not assosiate with over heating like leaking seals, bearing wearing out etc.
Need for reverse depends on where you ride and how often you want to have to drag the machine around. On the trails I ride it would be impossible to simply turn around without reverse. I have to turn around alot because I ride with my wife and kids who often ride much slower.
|
JJ400EX
Massachusetts
New Member
Joined: 07/18/2008
View Profile
Offline
|
Thanks for the suggestions guys. I appreciate the feedback and im already addicted to this hobby. I went out ridin yesterday and this morning. So i need to replace my steering stem and one of the tie rods is bent. I plan on ordering the tusk tie rod kit for 100.00 and I dont know if i should get an aftermarket stem or stock. I was looking at a getting either a Burgard +1 stem for 200 or a stock one for 70.00. Im 6 feet tall so i was thinking the +1 might be good for me. Also im going to order some new DG nerf bars with the heel guards because the old ones were beat and one fell off today. I hit a railroad tie and my rear lugnuts loosened up so now im going to get some new wheels and tires. I want to get some ITP 4 spoke rims and either kenda klaws or ITP Holeshot HD tires. Is there any disadvantage to getting the HD's versus regular holeshots or kenda klaws?
|
blasterfan84
lindsay Ont
Elite Member
Joined: 06/17/2006
View Profile
Offline
|
dont get DG, ever! actually fell ofent over the bike every race, but they till broke off, bent down, cracked, ive seero armor break pretty easy, it seems IMS Roll and Rath are the only way to go
KTM 450XC-Ohlins triple rates w/piggie, ohlins damper, hipers, some billet stuff, hindle exhaust, durablue spacers on the front, FLEXX bars, Walsh stem, Maier hood
Thanks to 08 Sponsors
HB Cycle
Scorpion Exo
Hindle
Race Toyota
TEKvest
www.KTMATV.org
|
drummer89
Hurrrr.
Elite Member
Joined: 05/07/2005
View Profile
|
blasterfan84 wrote:dont get DG, ever! actually fell ofent over the bike every race, but they till broke off, bent down, cracked, ive seero armor break pretty easy, it seems IMS Roll and Rath are the only way to go
Funny you say so cause all my hard parts are dg and that's the only thing that hasn't fallen to piece...between to bikes, we've had quite a bit of parts circulate around here...
#77 YFZ
|
suzukirider
New Castle, Pa
Elite Member
Joined: 08/20/2005
View Profile
Offline
|
My buddies haven't had much luck with DG or Pro Armor either, but I have the Rock heelguards, nerfs, and pegs on my kfx and it's actually a really good set up for only $240. By the way, go with the aftermarket stem, you'll be glad you did haha. Also, Stay away from HDs, but what kind of riding do you do?
|
pual0101
Washington,WV
Elite Member
Joined: 06/20/2006
View Profile
|
Amazingly Enough I've had excellent luck with Pro Armor it's all about luck
"I'm from a communist country, I don't have to share."
06 DVX 400
Houser +2 A-arms/Swinger
Lonestar Axle
Elka Elite Triple Rates w/Rezzies
HMF Ballance Full System **Red**
OSHC Intake/Exhaust
Tag X-5 Red z400 Bend
PRo Armor Fat Pegs Nerfs
ITP GNCCs/Hipers
|
YOURADHERE
Louisiana
Elite Member
Joined: 07/28/2006
View Profile
Offline
|
pual0101 wrote:Amazingly Enough I've had excellent luck with Pro Armor it's all about luck
So have I. Besides them being a pain to get mounted they've held up well.
|
bbqmaster
lompoc CA
Senior Member
Joined: 04/11/2007
View Profile
Offline
|
if you really want heel gaurds look into some nice IMS heel gaurds i think DG stands for D*mn garbage
|
JJ400EX
Massachusetts
New Member
Joined: 07/18/2008
View Profile
Offline
|
All trail riding, im new so im not going to be doing any racing or hardcore jumps or anything. I just want parts that are going to be reliable and not fall off after a year.
|
suzukirider
New Castle, Pa
Elite Member
Joined: 08/20/2005
View Profile
Offline
|
JJ400EX wrote:All trail riding, im new so im not going to be doing any racing or hardcore jumps or anything. I just want parts that are going to be reliable and not fall off after a year.
Well if you're doing ALL trail riding, RAZR2s are probly the best trail tire but they are heavy, maybe some holeshot xcr or xct would be great.
|
